Abrasive Blasting in Ahmedabad
For tanks, pipe racks, chimneys and plant structures around Ahmedabad, a Mythri Metallizing team travels from Bengaluru with its own compressors and blast sets.
- Site blasting to ISO 8501-1 Sa 2½
- Steel grit, copper slag, aluminium oxide
- Own compressors and blast sets
Blasting in Ahmedabad Chemical Estates
The Gujarat Industrial Development Corporation (GIDC) estates at Vatva and Naroda, together with the industrial areas at Odhav and Kathwada, hold dye, chemical, pharma and engineering units in close proximity. Steel in this atmosphere collects fumes and process dust, and tank bases and pipe supports can remain wet from spills and wash-down.
A coating applied over rust that still holds contamination fails early. Blasting to bare metal gives the next coating a sound base, and on these sites we treat it as the step that determines coating life.
Ahmedabad has a hot, semi-arid climate. Most of the year is dry, which suits blasting, but steel standing in the sun can be too hot to coat, because paint data sheets set a limit on steel temperature. In the monsoon months, humidity and dew point decide whether blasted steel can be coated on the same day, and we check both with a psychrometer.
Steel We Blast Around Ahmedabad
Chemicals and dyes, Vatva and Naroda GIDC
Storage tanks, vessel and reactor supports, pipe racks and gantries that have endured years of fumes and spillage.
Pharma plants, Changodar
Utility structures, outdoor tanks and pipe supports outside the production blocks, blasted within plant permits and away from clean areas.
Automotive and engineering, Sanand
Structural steel for new plant sheds and gantries, and fabricated frames that are too large to transport, blasted and primed before erection.
Power plants and the Dahej and Bharuch coast
Chimneys, ducts, boiler structures and tanks across Gujarat, including coastal steel where sea air adds salt to the chemical atmosphere.
Blasting Projects in Ahmedabad
A supervised team travels from our Bengaluru units with compressors, blast hoppers, hoses and abrasive. It works within your safety permits, protects nearby equipment from dust and operates in shifts so that a shutdown window is used fully. Where we also coat the steel, each blasted section is primed or metal sprayed before it can rust.
If your plant already has compressors and blasting sets, we can supply technicians and manpower alone. Otherwise, we ship the equipment with the team. Our teams have previously worked in Gujarat, at Hazira and Surat. Every project concludes with a record of the blast grade and surface profile.
- Air compressors
- 15 in the fleet
- Blast hoppers and hose sets
- 15 sets
- Air receivers
- 6 units
- Abrasives
- Steel grit, copper slag and aluminium oxide
- Inspection
- ISO 8501-1 comparison, surface profile gauge, psychrometer
- Steel thickness
- From 2 mm upwards
Frequently Asked Questions
Does Mythri Metallizing send a team from Bengaluru to blast in Ahmedabad?
Which abrasives do you use at plants in Ahmedabad?
Can you blast inside an operating chemical plant?
We have our own compressors. Can you send only the team?
Does the Gujarat heat or the monsoon affect blasting?
Send a Drawing for a Blasting Quote
Please share the structure, its dimensions and location, and your planned shutdown window. Our engineers will respond with a recommended method, schedule and quotation.
- Reply within one working day
- Drawings kept confidential
- Email acknowledgement
Thank you. Your enquiry has been received.
One of our engineers will contact you to discuss the requirement. A confirmation has been sent to your email address.