Five Facilities, One Standard

Three units are located in the Peenya Industrial Area, Bengaluru, and two further units, built for large fabrications, are located at KIADB Sompura, Dabaspet. Please share your drawing and specifications, and our team will confirm whether the work is best carried out at one of our facilities or at your site.

Request a Quotation Contact and directions
  • Peenya: Units I, III, IV
  • Dabaspet: Units II, V
  • Shop floor 24/7
Front of Unit V at Dabaspet, with the shed on the left and the office block on the right

Which Unit Does What

The main work at each unit. Our engineers confirm the best unit for each job when they review your drawing.

UnitAbrasive blastingThermal spray and metallizingPrimer and paintingStress relieving
Unit I (Head Office)Peenya Industrial Area YesYesYes–
Unit IIKIADB Sompura Yes–Yes–
Unit IIIPeenya Industrial Area ––Yes–
Unit IV (CPEI)Peenya Industrial Area Yes–YesYes
Unit VKIADB Sompura Yes–YesYes

Unit I (Head Office)

Peenya Industrial Area

Head office Directions on Google Maps
Since
1999
Area
Peenya Industrial Area
Address
No. 384/1 (1&2), 3rd Stage, 4th Phase, Thigalarapalya Main Road, Peenya Industrial Area, Bengaluru, Karnataka 560058

Our first unit and head office, in Peenya since 1999. Unit I handles abrasive blasting, metallizing and primer application.

  • Front of Unit I, the head office in Peenya, with the company nameboard
  • Unit I in Peenya seen from the street, with its gate and tiled roof

Unit II

KIADB Sompura, Dabaspet

Directions on Google Maps
Since
2015
Area
KIADB Sompura, Dabaspet
Address
Plot No. 87, 1st Stage, KIADB Sompura Industrial Area, Dabaspet, Nelamangala Taluk, Bengaluru Rural, Karnataka 562111

Large fabrications are abrasive blasted and industrially painted in dedicated blasting and paint booths, served by overhead cranes.

  • Front of the Unit II shed at Dabaspet, with an open shutter between two trees
  • Inside a Unit II bay, with an overhead crane and fabricated frames on the floor
  • An operator in protective gear spraying paint on a large grey fabricated frame
  • A large white painted fabrication standing in a Unit II shed
  • A large frame, blasted and primed, in front of a paint booth
  • A large fabricated steel part on a trolley at the open blast room of Unit II, Dabaspet
  • Inside a paint booth with a grated floor and a rail trolley carrying a primed casting
  • A white-primed casting on a rail trolley inside a paint booth
  • Shelves of primer paint tins in the Unit II stores

Unit III

Peenya Industrial Area

Directions on Google Maps
Since
2013
Area
Peenya Industrial Area
Address
No. 384/1 (5), 3rd Stage, 4th Phase, Thigalarapalya Main Road, Peenya Industrial Area, Bengaluru, Karnataka 560058

Dedicated to painting operations: surface sanding, putty application, primer application and final finishing coats.

Unit IV (CPEI)

Peenya Industrial Area

Directions on Google Maps
Since
2017
Area
Peenya Industrial Area
Address
No. 41/1A2, Kempegowda Industrial Area, Peenya 3rd Stage, 4th Phase, Thigalarapalya Main Road, Bengaluru, Karnataka 560058

Corrosion Protection Engineers India (CPEI), at Peenya, handles stress relieving, abrasive blasting and primer coating. Thermal spray is carried out at Unit I.

Unit V

KIADB Sompura, Dabaspet

Directions on Google Maps
Since
2026
Area
KIADB Sompura, Dabaspet
Address
Plot No. 15, 1st Stage, KIADB Sompura Industrial Area, Dabaspet, Nelamangala Taluk, Bengaluru Rural, Karnataka 562111

Our newest unit is equipped for large fabrications, blasting and painting, and houses the stress relieving furnace.

  • Front of Unit V, with the shed on the left and the office block on the right
  • Wide view of the Unit V shed, with a yellow overhead crane and castings laid out on the floor
  • Rows of grey primed castings on the Unit V shed floor under steel roof trusses
  • Close view of large grey primed castings in the Unit V shed
  • The Unit V stress relieving furnace, with its open door and rail trolley in front
  • The large paneled doors of a paint booth at Unit V
  • The red steel gate at the entrance to Unit V
  • The two-storey office block at Unit V, with two motorcycles parked outside

Plant Equipment and Facilities

Equipment

  • 15air compressors
  • 15blast hopper and hose sets
  • 6air receivers
  • 5airless spray units with pressure pots
  • 5paint agitators
  • 1cabinet blasting machine
  • 15thermal spray arc rectifier and gun sets

Stress relieving furnace

  • Up to 30 tload capacity
  • 7 × 3.5 × 3 mworking size (L × W × H)
  • 900 °Cmaximum temperature
  • Oil-fireddigital temperature recorder and printer, rail trolley

Inspection

  • Digital coating thickness gauges
  • Surface profile gauges
  • Cross-hatch adhesion tester
  • Psychrometer

Material handling and working hours

  • Overhead cranes in the sheds
  • The shop floor operates 24/7 across multiple shifts

Request a Quotation

Send your drawing and one of our engineers will respond directly.

Call+91 96861 11973 WhatsAppPhotographs and drawings Emailthermalspray@mythrimetallizing.net
  • Reply within one working day
  • Drawings kept confidential
  • Email acknowledgement

Enquiry Details

Please enter your name.
Please enter a 10-digit mobile number or a landline number with STD code.
The email address appears incomplete. Please check for a missing @ symbol or domain.
Please select a service, or choose "Not sure, please advise".

Thank you. Your enquiry has been received.

One of our engineers will contact you to discuss the requirement. A confirmation has been sent to your email address.